Assessment Validation: What You Need to Know to Validate Assessments

Assessment Validation: What You Need to Know to Validate Assessments

Blog Article

Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.

We have numerous articles on validation, but let's go back to the term itself. ASQA defines validation as a quality review of the assessment process.

Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.

As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

According to the standards, two types of validation are necessary.

The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.

The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.

This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.

Exploring the Two Types of Assessment Validation

Assessment Validation Unpacked

As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.

On the other hand, post-assessment validation deals with implementation, ensuring Registered Training Organisations follow the Principles of Assessment and Rules of Evidence.

This article will focus on assessment tool validation.

How to Properly Conduct Assessment Tool Validation

With a clear understanding of the two types of validation, let’s focus on assessment tool validation.

Optimal Timing for Assessment Tool Validation

The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.

Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.

You don't have to wait for the next validation schedule in your 5-year cycle. Validate new resources as soon as you get them to ensure they’re suitable for students.

However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:

- resources are updated
- add new training products on scope
- your course gets reviewed against training product updates
- identify your learning resources as a risk during your risk assessment

ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.

What Training Products Should Be Validated?

It's important to remember this validation ensures that all learning resources are compliant before use. All RTOs need to validate resources for each unit.

Starting Assessment Tool Validation: What You Need

Learning Materials

Since you are validating your assessment tools, you will require the entire suite of your learning resources:

Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.

Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.

Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item exist. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.

Panel for Validation

Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.

Your validation panel must, as a group, possess:

Vocational competencies and industry skills pertinent to the unit being validated

Recent expertise and skills in vocational teaching and learning

Any one of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the successor version

Assessment validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.

Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While such templates facilitate validation, they often result in judgment errors because there’s insufficient space for comments on each assessment item.

It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What get more info Should Be Inspected?

As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?

Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?

Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Evidence Key Rules

Validity – Is the evidence showing that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?

Currency – Do the assessment tools reflect current units of competency and modern industry practices?

Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:

Practice What You Preach

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

diaper change

prepare bottles, bottle-feed babies, and clean equipment

prepare solids and feed infants

respond suitably to infant signs and cues

settle babies for sleep and prepare them

monitor and foster physical exploration and gross motor skills appropriate for the age

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

Complete Compliance or Not Competent

Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail

Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What details can be included in a work package?

The answer might include:

Obligatory resources

Applicable expenses

Length of activities

Appointed roles and responsibilities

When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:

Name a hazard and/or environmental issue in the work area and choose the most effective hazard control hierarchy.

Answers can include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – eliminating hazards, isolating, engineering controls

People – isolation, engineering controls, administration

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolation, use of engineering controls, administrative controls

Equipment or machinery – isolating, engineering controls, administration

Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.

Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.